Curved Stairlift Specialists

How long does it take to install a curved stairlift?

How long it takes to install a curved stairlift comes in two parts: the wait while the rail is made, then a fitting visit of a few hours. Each maker describes both differently, so here they are side by side in the makers’ own words, with the date each page was read.

Figures on this page were read at their sources on 13 November 2026. Published by SEO Dons Ltd; every source is listed at the foot of the page.

In short

The fitting itself takes a few hours: 2 to 6 hours at TKE, 4 to 8 hours on Age UK Trading’s product pages, a few hours at Stannah and Acorn. The wait before it is longer. Stannah says its curved rails take around three weeks to make, TKE aims to deliver in one to three weeks, and Age UK Trading gives an average of ten working days from order. Acorn says its modular rail allows fitting within days.

Two different waits

When someone asks how long a curved lift takes, the answer depends on which wait they mean. There is the time between ordering and the fitting day, while a rail is designed and made for the staircase, and there is the fitting day itself. Sellers rarely put the two in one sentence, and a figure for one is often quoted as if it were the other. This page keeps them apart.

The wait matters most when a lift is needed for a hospital discharge or after a fall. If time is short, ask each firm both questions separately, and compare the routes that can be quicker: a rented curved lift still needs a rail, and a reconditioned curved lift from Stannah has its rail made new, so it still waits for a rail to be made.

Ask how soon a curved lift could be fitted

Say how soon you need it in the optional questions. We answer by email.

Waiting on a council grant? Sign nothing and order nothing until the council says yes: GOV.UK warns that work started before approval may get no grant. Read the rules on GOV.UK.

Tell us about the turns and your timing (optional)

Published by SEO Dons Ltd. We don’t make or fit stair lifts. We reply by email. Nothing is ordered on your behalf. How your details are used.

The wait and the fitting visit, maker by maker

Maker or sellerThe waitThe fitting visitSource, date read
StannahSiena or Starla, stairs with one or two turns Around 3 weeks to make the curved rail, its installation page says A few hours to fit the rail at home; it estimates the average installation takes “between 2 and 4 hours”The FAQ data on its reconditioned page puts delivery for stairs with turns at around 4 weeks from the order. Stannah: Stairlift installation process Stairlift for stairs with turns Reconditioned stairlifts Read 13 Nov 2026
Acorn StairliftsAcorn 180 on its FastTrack modular rail Curved lifts installed “within days of an initial customer inquiry”; the product page says “in a matter of days” The rail is assembled and fitted “in just a few hours”The same page says that in some cases it can offer next-day installation. That is Acorn’s wording, dated 13 November 2026, not a promise. Acorn Stairlifts: FastTrack: its page on the modular rail and fast fitting Acorn 180 curved stairlift (product page and specification) Read 13 Nov 2026
TKE Home SolutionsAny of its stair lifts “we aim to have it delivered between 1-3 weeks” “installations can take anywhere between 2 – 6 hours”, depending on the lift ordered TKE Home Solutions: Stairlift FAQ Read 13 Nov 2026
Age UK Trading4000, Freecurve and Perch curved lifts (made by Handicare) On its renting page: curved lifts “can take an average of 10 working days from the time your order is placed” Product pages: “Installation usually takes 4–8 hours.” Installation page: curved lifts are “typically completed within half a day”Two of its own pages give different fitting times; both are shown. Age UK Trading: Renting a stairlift Stairlift installation Read 13 Nov 2026
EMS LiftsAccess Flow X and Otolift Modul-Air Smart (as sold by EMS) “fast delivery”, with no length of time given “Fitted in just a few hours” EMS Lifts: Access Flow X curved stairlift Otolift Modul-Air Smart curved stairlift Read 13 Nov 2026
In each publisher’s own words, read on 13 November 2026. A wait is the seller’s own description, not a promise.
Four makers and sellers with the wait and the fitting visit in separate columns: Stannah, TKE Home Solutions, Age UK Trading and Acorn Stairlifts.
The same four makers, the wait on the left and the visit on the right.

From the first call to the fitting day

Stannah sets out its own steps in order, and other makers describe much the same path. Its version runs: a call, a visit from a sales consultant who explains the options and gives a written quote, your decision to order, then a deposit, any preparation work by its subcontractors and a fixed date. On the day, its team fits the lift, tidies up and shows you how to use it. The wait for a curved rail sits between ordering and that fixed date.

How the stairs are measured is where makers differ most. TKE says its sales surveyors measure the staircase at home and that it uses Microsoft HoloLens smart glasses to measure a whole staircase in one visit, which it says speeds up the design of complex curved stairs. Acorn says its advisor gives an exact cost once the staircase has been measured. Otolift, which sells through dealers in the UK, says every rail is tailored to the staircase.

Why Acorn quotes days, not weeks

Acorn’s 180 runs on what it calls FastTrack, “a unique modular rail system” built from an inventory of differently shaped interlocking sections. It says that by picking the right sections, its installers can assemble and fit a rail “in just a few hours”, and that this lets it install curved lifts within days of a first enquiry. Its product page says there is “no waiting weeks to have an expensive rail made”.

The same page says that in some cases Acorn can offer next-day installation. That is Acorn’s own wording, read on 13 November 2026. It is not a promise from this site or from anyone else, and whether it applies depends on your stairs.

What happens on the fitting day

Age UK Trading describes the job in the most detail. A technician first checks the home, then fixes brackets to the treads with two to five screws each and mounts the rail on them, so the banister and walls are not touched and the carpet can stay down; small holes are left in it. It says a straight lift takes around four hours and a custom-fitted curved one slightly longer, typically within half a day. After fitting, the engineer runs safety checks and shows you how to use the lift and keep it clean.

Stannah estimates that “the average installation takes between 2 and 4 hours”, and says that stairs with turns, or jobs needing alterations first such as moving a radiator, may take slightly longer. It says such preparation work is included in its quote. TKE gives 2 to 6 hours depending on the lift ordered.

What can make the wait longer

  • More turns and landings. EMS Lifts says more bends or landings mean a longer, more complex rail.
  • Work before fitting. Moving a radiator or trimming a windowsill has to happen first, Stannah says.
  • Your choice of finish. Stannah gives longer times for some upholstery choices even on straight stairs.
  • A council grant. If you hope for a Disabled Facilities Grant, nothing should be ordered until the council approves it: GOV.UK warns that work started first may get no grant.

The price side of the same decision is on curved stair lift prices, and the rail itself is explained on curved rails and narrow stairs.

Renting: is it any quicker?

Not by much, because a rented curved lift still needs a rail for your stairs. Age UK Trading’s renting page says curved lifts can take an average of ten working days from the order. Stannah’s rental page gives around three weeks for stairs with turns. The terms of renting are on curved stair lift rental.

Questions about curved fitting and lead times

How long does it take to install a curved stairlift?

The fitting visit takes hours: Stannah says just a few hours, TKE 2 to 6 hours depending on the lift, and Age UK Trading 4 to 8 hours on its product pages or within half a day on its installation page. The longer part is the wait before that visit, while the rail is made: around three weeks at Stannah, for example.

Why does a curved rail take weeks when a straight one takes days?

A straight rail is cut from stock to the length of the flight. A curved rail is made for your staircase after it is measured. Stannah says its curved rails are individually designed and handmade. Acorn’s FastTrack system is the exception it describes: a rail assembled from ready-made interlocking sections, which it says lets it fit curved lifts within days of a first enquiry.

Can a curved stair lift be fitted the next day?

On 13 November 2026, Acorn’s FastTrack page said that in some cases it can offer next-day installation. That is one maker’s wording on that day, not a promise from anyone, and it depends on the stairs. Other makers describe waits of one to four weeks.

Will fitting a curved rail damage the stairs or walls?

Age UK Trading says the rail sits on brackets fixed to the treads with two to five screws each, so the banister and the walls are not touched and the carpet does not need lifting; small screw holes are left. Stannah and Acorn both say their rails fix to the stairs rather than the wall.

Where this page’s figures come from

Every number above was copied from one of the pages listed here, on the date shown beside it. Makers change their figures, so treat each one as that publisher’s figure on that day and ask them before relying on it. How each figure is dated, checked and corrected is described under sources and checks.

Get a curved stair lift quote
Get a curved stair lift quote