Curved Stairlift Specialists

Why are curved stairlifts so expensive?

Why are curved stairlifts so expensive? Because almost every part of the job is done once, for one staircase: the measuring, the rail, the testing and the fitting. Here is each step as the makers describe it, and the ways the published sources say the cost can be brought down.

Figures on this page were read at their sources on 13 November 2026. Published by SEO Dons Ltd; every source is listed at the foot of the page.

In short

A curved rail is designed, made, tested and fitted for one staircase only. Stannah says its curved rails are individually designed and handmade and take around three weeks to make. Which? gives a rough rule that every corner doubles the starting price, and puts custom curved models at £4,500 to £8,000 or more. And when you no longer need the lift, the rail has almost no second use.

Step by step: where a curved price comes from

1. Measuring one staircase

A straight lift needs a length and an angle. A curved one needs the whole shape: every tread, every turn, the width at each point and the space at the top for getting off. TKE says its sales surveyors measure the staircase at home, using smart glasses that capture the whole staircase in one visit, which it says speeds up the design of complex curved stairs. Acorn says it gives an exact cost only once the measurements are taken. That visit is part of what you pay for, whether or not the price list shows it.

2. Designing a rail for that shape

Stannah says a lift for stairs with turns is made to measure and fitted to the exact dimensions of the staircase, and that each customised rail is shaped to hug every turn. On TKE’s S200, even the movement is programmed for your stairs: its ASL technology turns the chair and footrest together during the ride, and TKE says it is programmed specifically for the staircase.

3. Making the rail

This is the step that sets curved lifts apart. Stannah says its curved rails are designed individually and made by hand, and take around three weeks to manufacture. Acorn takes another route with its FastTrack rail, assembled from a stock of differently shaped interlocking aluminium sections; it says that lets it fit a curved lift within days. Either way, the rail is made or assembled for your stairs and no one else’s.

4. Testing before it leaves

Stannah says all of its stair lift rails are assembled and tested before installation, and that during design testing its prototype lifts for stairs with turns travel 222 miles. That testing is spread across every lift sold, but it is still a cost a straight lift carries less of.

5. Fitting it

The fitting day is the cheapest part in time: a few hours, by every maker’s account. Age UK Trading says curved jobs take a little longer than straight ones and are typically finished within half a day. The full figures are on curved lead times and fitting.

6. A chair that copes with the turns

Going round a corner asks more of the chair as well as the rail. Makers add features to keep knees clear and the seat level: TKE’s ASL on the S200, the optional Two-Way Powered swivel on Handicare’s Freecurve, and Otolift’s optional Reverse Drive, which moves the chair partly or fully backwards on narrow stairs. Each is a cost a simple straight lift does not have.

7. No second life for the rail

When the lift is no longer needed, a straight rail can be cut down for another home. A curved rail rarely can. Stannah makes a new rail even for a reconditioned lift on stairs with turns, and TKE’s buy-back offer for a curved lift it supplied and serviced is £200 at most, for one under a year old. More on reconditioned curved lifts.

Plan of a quarter-turn staircase with fanned steps at the corner and the rail on the inside: a straight run, a bend made to the angle of the turn, another straight run, brackets on the treads and the parking point at the bottom.
Every bend is made to the angle of one turn, which is why the rail cannot simply be reused.

Does each corner double the price?

Which? offers a rough guide: “every corner in your staircase will double the initial price”. It is a useful sense check, but it does not mean that a staircase with two corners costs four times a straight one: it is a rule of thumb, not a formula, and makers do not publish their pricing that way. Stannah says prices for stairs with turns depend on the length and shape of the staircase and on the features chosen. EMS Lifts says more bends or landings mean a longer, more complex rail. The published figures themselves are on curved stair lift prices.

Ways the sources say the cost can come down

  • Two straight lifts instead of one curved. Which? says this may cost less for two straight flights with a landing between them, if the person can move safely from one lift to the other. See stairs with a landing.
  • A straight lift with a bridging platform. Which? says a staircase that is straight apart from a curve right at the top may suit this.
  • The model. Otolift says some models are made only for certain staircase shapes, while others fit almost any staircase but cost more.
  • Where the rail starts and ends. Otolift says ending the rail at the first step costs less than adding a parking curve beside the stairs.
  • A used chair on a new rail, or renting. Both are covered on reconditioned curved lifts and curved rental.

Whatever the route, ask for the rail, the chair, the fitting and the warranty as separate lines, so that two curved quotes can be set side by side. The quote page lists what a curved quote should spell out.

Every claim on this page was read at its source on 13 November 2026.

Questions about the cost of a curved lift

How much more does a curved stair lift cost than a straight one?

Which? gives a rough rule of thumb: every corner in a staircase doubles the starting price. Its range for custom curved models, £4,500 to £8,000 or more on makers’ 2026 figures, starts above the top of its range for standard straight lifts. The curved figures are on curved stair lift prices.

Is there a cheaper option than a curved stair lift?

Which? names two. If the stairs are two straight flights with a landing between, two straight lifts may cost less, provided the person can move safely from one to the other. If a straight flight curves only right at the top, a straight lift with a bridging platform may reach the landing.

Does a modular curved rail cost less than a handmade one?

This site cannot say. Acorn, which sells the best-known modular rail, prints no price for its curved lift; it gives an exact cost after the stairs are measured. What a modular rail does change, by Acorn’s account, is the wait: it says its curved lifts can be fitted within days.

Why can’t a curved stair lift be moved to my next house?

Because its rail follows the bends of one staircase. Stannah makes a new rail even when it sells a reconditioned lift for stairs with turns, and TKE offers £200 at most to buy back a curved lift it supplied and serviced, if it is under a year old.

Where this page’s figures come from

Every number above was copied from one of the pages listed here, on the date shown beside it. Makers change their figures, so treat each one as that publisher’s figure on that day and ask them before relying on it. How each figure is dated, checked and corrected is described under sources and checks.

Get a price for your own curved staircase

The only way to see what your stairs cost is a quote. Tell us their shape and how you expect to pay; SEO Dons Ltd answers by email.

What happens next

  1. SEO Dons Ltd, which publishes this site, receives what you send.
  2. We read it and write back by email.
  3. You decide what happens next. Nothing is ordered for you.

Waiting on a council grant? Sign nothing and order nothing until the council says yes: GOV.UK warns that work started before approval may get no grant. Read the rules on GOV.UK.

Tell us about the turns and your timing (optional)

Published by SEO Dons Ltd. We don’t make or fit stair lifts. We reply by email. Nothing is ordered on your behalf. How your details are used.

Get a curved stair lift quote
Get a curved stair lift quote